Model Number

MW1800-150

Corrugated Cardboard Produciton Line:
1.It includes mill roll stand, single facer, pre-heater, bridge, gluing machine, double backer facer, slitting machine, cut off machine and stacker.
2.Effective width: 1400-2500mm.
3.Maximum production speed: 150m/min.
4.Flute A, B, C, E and BC

Shaftless Mill Roll Stand:

1.Motorized lifting and lowering 2.Motorized clamping, right-left adjustment 3.The web tension is controlled by manual brake .Pneumatic brake is optional 4.Maximum paper rollDia.1500mm 5.Equipped with motor protecting device 6.Six-arris center, stretch center is optional 7.Available width:1300-1800mm

Hydraulic Mill Roll Stand:

1.Hydraulic lifting and lowering ,paper rolls on both arms ban be loaded at same time 2.Motorized clamping and right-left movement, hydraulic driving is optional 3.The web tension is controlled by manual brake, pneumatic or magnetic power brake is optional 4.Maximum paper roll Dia.1500mm 5.Six-arris center, stretch center is optional 6.Available width:1300-1500mm

Fingerless Single Facer:

1.Vacuum suction system provide perfect flute shape 2.Individual driving box separate dynamic oscillating to improve running stability 3.The corrugating roll is made of special alloy steel with grinding process and induction hardened with of hardness HRC55-60 4.Diameter of upper corrugated roll is Φ255mm, diameter of lower corrugated roll is Φ280mm 5.Auto-circulating glue feeding system is provided, surface of gluing roll is embossed with netting design and chrome plated 6.Gluing roll engaging or disengaging, flute formation and glue application are all pneumatic controlled 7.Main bearings are all lubricated with special grease to provide outstanding sealing performance and reliable lubricating 8.Maximum speed:100m/min 9.Available width:1300-1800mm

Fingerless Single Facer:

1.Vacuum suction system provide perfect flute shape 2.Individual driving box separate dynamic oscillating to improve running stability 3.The corrugated roll is made of special alloy steel with grinding process and induction hardened with of hardness HRC55-60, the diameter of the corrugated roll isΦ320mm 4.Auto-circulating glue feeding system is provided, manua l adjust glue application are motorized adjustment is optional. Surface of gluing roll is embossed with netting design and chrome plated 5.Gluing roll engaging or disengaging, flute formation and glue application are all pneumatic controlled 6.Main bearings are all lubricated with special grease to provide outstanding sealing performance and reliable lubricating 7.Diameter of corrugating rolls of W02E type is 320mm 8.Maximum speed:150m/min 9.Available width:1300-2200mm

Fingerless Single Facer:

1.Vacuum suction system provide perfect flute shape 2.Individual driving box separate dynamic oscillating to improve running stability 3.The corrugated roll is made of special alloy steel with grinding process and induction hardened with hardness HRC55-60. The diameter of the corrugated roll is Φ360mm 4.Auto-circulating glue feeding system is provided, motorized glue application amount. Digital read out device is optional 5.The glue application unit can be removed out easy, which simplifies maintenance and adjustment 6.Gluing roll engaging or disengaging, flute formation and glue application are all pneumatic controlled 7.Main bearings are all lubricated with special grease to provide outstanding sealing performance and reliable lubricating 8.Inverter control motor is optional 9.PLC control unit is applied, screen display parameter 10.Maximum speed:200m/min 11.Available width:1400-2500mm

Fingerless Single Facer:

1.Twin facer structure, one flute unit working and another pre-heating 2.Operate the switch of the clutch to change flute rapidly and can get kinds of flute type combination 3.Vacuum suction system provide perfect flute shape 4.Individual driving box separate dynamic oscillating to improve running stability 5.The corrugated roll is made of special alloy steel with grinding process and induction hardened with of hardness HRC55-58. The diameter of the corrugating roll isΦ320mm 6.Auto-circulating glue feeding system is provided, motorized glue application amount. Digital read out device is optional 7.The flute formation is hydraulic controlled, glue application is pneumatic controlled 8.Main bearings are all lubricated with special grease to provide outstanding sealing performance and reliable lubricating 9.PLC control unit is applied, screen display parameter 10.Maximum speed:250m/min Available width:1400-2500mm

Pre-heater:

1.Preheating roll Diameter:Φ600/Φ900/Φ1100 2.Equipped with brake device for preheating roll to adjust web tension 3.Motorized wrap angle adjustment 4.Multiplex pre-heater can be combined 5.Available width: 1300-2500mm

Bridge Conveyor:
1.Constructed by channel, I-steel, steel plate etc.
2.Two sets of single face paper take up system, driven by its' single facer to ensure synchronized to the speed of single facer.
3.Two sets of single face conveying system.

Glue Machine :

1.Simplex, duplex and triplex glue machine are respectively suitable for single, double and triple wall corrugated production line 2.High precision engraved applicator roll ensure uniform glue application and less glue consumption 3.Auto-circulating glue feeding system is applied to avoid glue depositing 4.Driving source is from double facer 5.The self-preheating device speeds up glue gelling and create a stronger glue bond 6.Maximum speed: 100m/min 7.Available width: 1300-1800mm

Glue Machine:

1.Simplex, duplex and triplex glue machine are respectively suitable for single, double and triple wall corrugated production line 2.High precision engraved applicator roll ensure uniform glue application and less glue consumption 3.Auto-circulating glue feeding system is applied to avoid glue depositing 4.Driving source is from double facer; individual driven with automatic synchronization of every layer is optional 5.The self-preheating device speeds up glue gelling and create a stronger glue bond 6.Designed of pressure roll system, the maximum speed is 150m/min; designed of pressure shoe system, the maximum speed is 200m/min 7.Oil-coating device is optional 8.PLC control system and screen display parameter system is optional 9.Available width: 1300-2500mm

Double Baker Facer:

1.The hot plate is surface ground with 600mm in width and with 110mm in height, according to requirement, 12, 14, 16, 18 or 21 pieces of hot plates can be configured in heating section. The temperature readout device is optional 2.For model W05B, dense weight roll are applied for heating section and motorized height adjustment as a whole 3.For Model W05A, dense weight roll are applied in three groups, pressure shoe or chain plate instead of weight roll is optional, motorized lifting or lowering as a whole, hydraulic lifting or lowering system is optional 4.Dense width rolls of cooling section ensure perfect forming quality. Chain plate instead of weight rolls is optional 5.Manual deviation-correcting device is equipped for the upper and lower cotton belt. Automatic deviation-correcting device is optional for the upper cotton belt 6.Maximum speed: 100-200m/min 7.Available width: 1300-2500mm

Thin Blade Slitting Scorer:

1.Thin blade enable clean cutting edge at high speed 2.Motorized lifting and lowering of working station for quick tool set up Manual or timer control grinding device keeps blade edge sharp all along. Automatic grinding device is optional 3.Manual scoring depth adjustment 4.Motorized web deviation correcting 5.Manual tool set up 6.Slitting and scorer with one motor, maximum speed is 100m/min 7.Individual drive slitter and scorer, maximum speed is 150m/min 8.Minimum slitting space is 140mm, minimum scorer space is 70mm 9.Slitting paperboard in 3 out or 4 out, or according to request 10.Available width:1400-2000mm

NC Slitter Scorer:

1.Thin blade enable clean cutting edge at high speed 2.Automatic grinding device and lubrication system keep blade always sharp 3.99 orders can be stored in computer and according to the priority, computerized high speed order change improves working efficiency 4.Tool positioning and order change can be finished at one time to realize high speed order change 5.Driven by gear-motor, the tool heads can realize high-speed and precise positioning 6.Motorized web deviation correcting 7.Tools are driven by leading screw and screw nut, ball leading screw is optional 8.Automatic scoring depth adjustment 9.Minimum slitting space is 180mm, minimum scorer space is 150mm 10.The scrap-collecting wind tube can automatically align 11.Computerized synchronization with the line 12.Maximum speed:200m/min 13.Available width:1400-2500mm

NC Cut Off:

1.Single structure, duplex structure is optional 2.Simple NC cut off is 60m/min for optional 3.Straight cut-off knife is applied, helical knife is optional 4.Precision adjustable anti-backlash gear ensures accurate mesh between knives 5.Computerized synchronization with the line, color-tracking function is optional 6.Advanced man-machine interface, screen display running parameter 7.The sun-wheel is applied at parts of leading in and leading out. Vacuum device is optional to make sheet regular 8.99 orders can be stored in computer and automatic order change 9.Sheet length:500-9999mm. Cutting precision:±1mm 10.Maximum speed:150-180m/min 11.Available width:1400-2200mm

Stacker:

1.Simplex structure, duplex structure is optional 2.Lengthways conveying, manual batching, automatic stacking and transverse ejecting 3.Maximum stacking length is 3100mm. Maximum stacking height is 250mm 4.Maximum speed:100m/min 5.Available width:1400-2500mm

Stacker:

1.Single structure, duplex structure is optional 2.Gantry stacking, automatic lifting & lowering, transverse conveying ejecting for the upper section. Row-rollers stacking and motorized transverse ejecting for the lower section 3.Wide belt conveying is stable and in good order. 4.Upper maximum stacker length is 3500mm, down stacker length is 2500mm 5.Upper maximum stacker height is 1600mm, down stacker height is 250mm 6.Maximum speed is 150m/min

Computerized Stacker:

1.Computerized sheets conveying, counting, batching and stacking, connecting with production-manage system and realize automatic change order. PLC control system is optional 2.Automatic stacking, hydraulic lifting and lowering, motorized transverse transferring 3.Anti-deviation full-width conveying belt ensure smooth and regular stacking 4.Simplex structure, duplex structure is optional 5.Maximum stacking height is 1500mm. Maximum stacking length is 3500mm 6.Maximum speed:200m/min 7.Available width:1400-2500mm